4 GAL/CS IShine Floor Finish

EXCELLENT GLOSS AND CLARITY: In a 31-day test of iShine and a competitive product, iShine out-performed the competition in overall gloss, wear resistance, and gloss retention. With a higher than average gloss build and better than average gloss retention, iShine is proven effective over the competitions’ performance.

NON-YELLOWING, TRUE COLOR ENHANCEMENT: iShine reflects the true coloration of flooring, dries crystal clear and will not discolor or cast any yellowing tones to the floor. The actual color of the floor covering shines through while optical enhancers perfect blemishes.

PROTECTION PERFORMANCE: iShine is a durable finish that has excellent scuffmark, water spot, black heel mark and powder resistance. The 25% solids floor finish is formulated to provide maximum protection.

SAVE ON LABOR COSTS – QUICK BUILDING: Since only four coats of finish are needed with iShine to provide superior protection, labor costs are minimized. Unlike most high solids finishes, the technology found in iShine creates great ease of application and incredible leveling. iShine’s high solid formula builds quickly offering more protection in each coat.

UL APPROVED: Independent testing for slip resistance by Underwriter Laboratories confirms the static coefficient of friction of iShine meets or exceeds 0.5 as determined by ASTM Method D 2047.

DIRECTIONS FOR USE: Some individuals may be sensitive to ingredients in this product. Before using, read product label and MSD sheet. Wet floors may be slippery. Prevent pedestrian traffic with signs or barricades.

INITIAL APPLICATION:

1. Completely strip all old wax or floor finish. Depending upon build-up, use warm or room temperature water (80°F – 120°F) and a Spartan stripper.

2. Remove all stripping solution and follow with two to three clear water rinses.

3. When flooring is old, abused or damaged, two coats of a Spartan sealer is recommended, although iShine may be used as a self-sealing finish.

4. Apply iShine in a uniform coat. Let dry thoroughly for 30 to 40 minutes until surface is dry to the touch. Apply subsequent coats in the same manner. Two to four coats are recommended.

MAINTENANCE:

Routine: Dust mop with Spartan’s Dust Mop/Dust Cloth Treatment™ and damp mop with a Spartan neutral cleaner.

Weekly: Dust floor with Spartan’s Dust Mop/Dust Cloth Treatment and damp mop with a Spartan neutral cleaner. To repair traffic areas between finish applications, use Spartan Bounce Back®, Spraybuff or SunSwept®.

COVERAGE: Up to 3,000 square feet per gallon depending on application method and porosity of floor.